Are you planning to build a skatepark in your backyard but don’t where to begin?
Then don’t worry, we will help and guide you through this process. In this article, we will discuss how you can build a backyard skatepark.
Building a skatepark is a dream of inline skaters, but they never fulfill their dream because they think it is to hard to create a backyard skatepark.
However, in reality, it is relatively easy to build a skatepark. All you need is a good plan and some carpentry skills, and then you are ready to create your very own skatepark.
To help you with the creation process, below we have discussed a step by step guide for creating a DIY backyard skatepark.
- Check Your Place Zoning Laws
Before beginning with the creation process, firstly check out your zone laws and find out whether it is legal to build a Skatepark in your city or not.
Every city and town has its own zoning laws that regulate the construction of things like fences, gazebos, tool sheds, and of course skate parks.
So make sure to check zoning laws; otherwise, you might need to face some bad consequences like hefty fees to construct the skate park without permission. Once you fulfill all the legal requirements, you can begin building your skatepark.
- Find a Good Location
Not every backyard is perfect for creating a skateboard ramp. You need to make sure the right amount of space is available to construct a skate park.
If you don’t have enough space, then it will be tough for you to create an functional and flowing skatepark. Less space can also make it hard to skate giving you more chance of an injury while skating.
- Decide Your Budget and Create a Plan
Once you find a suitable location, then you need to decide your budget. Find out how much you are going to spend on building a skatepark.
Deciding a Budget is one of the most critical tasks. Find out how much money you can reasonably spend on this project. Consider this is as a long-term investment for your Kid’s physical health and coolness factor.
While deciding your budget, you can also discuss it with your family or a friend. When you finalized your budget, your next step is to plan your skatepark.
While planning for the creation of the skatepark answer the below questions and note them down on a notepad.
- How much space do you have?
- How much money do you have?
- Does the climate condition of your location good for skating?
- How serious about skating are you and your friends/ family?
Once you get answers to the above questions, you are ready to create your skatepark. So now just make a rough sketch of how your skatepark will look.
- Gather the Construction Material and Tools
There are two ways to buy the material and tools either you can go to the brick and mortar store, or you can order all the products online. Thanks to the internet this makes shopping way easy.
But before that, you need to decide what material and tools you want. For this, you can take the help of a website EasyHalfpipe.com. It is a website that provides you with a detailed plan and steps by step instruction DVD at a reasonable price. Highly recommend as they plan it all out for you.
When it comes to buying material, do not hesitate to spend more. If you start cost-cutting while purchasing the material, then there are chances that you might face a lot of issues in the future due to the poor quality of your materials.
Always use the best materials, so your skatepark works efficiently and stays safe for many years to come. When it comes to tools, you do not require very expensive and special tools. Your can pick them up fairly cheap these days.
The most expensive tool you need is a jigsaw. Apart from this, all you need is a drill, hammer, and screwdriver. There are chances that you or your neighbors already have these tools. If not, then also it is not a problem because you don’t need to spend much money to buy these tools.
- Start Creating the Skatepark
While creating the skatepark, you need to focus and build three main things that we have listed below:
Ramps
Ramps are one of the essential parts of the backyard skatepark. The ramps provide speed, air, and grindable ledges. Moreover, ramps also give a cool look to the skate park.
To build a ramp, you need the following components:
- Curved size pieces that are cut with the help of jigsaw.
- Horizontal joists must be screwed into the curved side pieces.
- A curved ramp surface built with plywood sheets and screwed into the joists.
- A coping made from metal pipe or PVC
When you have all these things, you can start building ramps according to the correct dimensions you decide for your skatepark.
Grindable Components
Grind rails can be made of different sizes and lengths. So the person can quickly master the basic grind tricks. Usually, anyone can easily find a basic grind rail under $200.
But if anyone wants to spend less, then they can create a grind rail by themselves with the use of some basic tools, check out this video of probably the cheapest practice rails to be made – How to build a cheap DIY skate rail | Skidz Grindplates
Building your own grind rail, cost significantly less compared to buying the new one.
You can use a website like DIYSkate to build the grind rails by yourself. DIYSkate has a lot of free blueprints that can guide you on how to create grind rails.
Concrete Bowls
The last step in creating the skatepark is building a concrete bowl. Concrete bowls are perfect for the non-stop wave function of the skater.
Most of the professional skaters prefer to have a concrete bowl in the backyard skatepark. Concrete is a material that dries very fast, so while dealing with concrete, be careful.
Furthermore, you need a lot of planning to build a concrete bowl. Also, to create a bowl, you need to dig a lot which is quite a time-consuming and difficult process.
Conclusion
Building a skatepark doesn’t have to be a difficult task; all you need is a good plan. However, you need to keep one thing in mind that a lot of energy is required to build the skatepark.
So instead of doing everything alone, you should take the help of friends or family. This will speed up the creation process, and all the work will be divided. So no one will feel exhausted and stressed out. Remember this is mean to be fun and don’t be afraid to walk away and come back at it another time.
To build a skatepark, you’ll need some building skills and a lot of free time. If you don’t have much free time, then it is good to hire a company to build the skatepark instead of doing it all by yourself.
I hope you guys enjoyed reading this informative article on How to Create a DIY Backyard Skatepark. If you found this article helpful don’t forget to pass it on to your friends.
Thanks.
