SIGN UP TO OUR VIP CLUB AND GET EXCLUSIVE OFFERS

How to Build a Backyard Skatepark

Are you planning to build a skatepark in the backyard but don’t where to begin then don’t worry, we will help you with this process. In this article, we will discuss how you can build a backyard skatepark.

Building a skatepark is the dream of various inline skaters, but they never fulfil their dream because they think it is challenging to create a skatepark.

However, in reality, it is relatively easy to build a skatepark. All you need is a good plan and some carpentry skills, and then you are ready to create a skatepark.

Moreover, to help you with the creation process below, we have discussed a step by step guide for creating a DIY backyard skatepark.

  1. Check Your Place Zoning Laws

Before beginning with the creation process, firstly check out your zone laws and find out whether it is legal to build a Skatepark in your city or not.

Every city and town has its own zoning laws that regulate the construction of things like fences, gazebos, tool sheds and of course skate parks.

So make sure check zoning laws; otherwise, you might need to face some bad consequences like hefty fees to construct the skate park without permission. Once you fulfil all the legal requirements, you can begin building a skatepark.

  1. Find a Good Location

Not every backyard is perfect for creating a skateboard ramp. You need to make sure a right amount of space is available for building the skate park.

If you don’t have enough space, then it will be tough for you to create an efficient and functional skatepark. Moreover, less space can also give you an injury while doing the skating.

  1. Decide Your Budget and Create a Plan

Once you find a suitable location, then you need to decide your budget. Find out how much you are going to spend on building a skatepark.

Deciding a Budget is one of the most critical tasks. Find out how much money you can reasonably spend on this project. Moreover, consider this is as a long-term investment for your Kids physical health and coolness factor.

While deciding your budget, you can also discuss it with your family. When you finalized your budget, your next step is to plan your skatepark.

While planning for the creation of skatepark answer the below questions and note them down on a notepad.

  • How much space do you have?
  • How much money do you have?
  • Does the climate condition of your place is good for skating?
  • How much your family members are serious about skating?

Once you get answers of the above questions, you are ready to create your skatepark. So now just make a rough sketch of how your skatepark will look.

  1. Gather the Construction Material and Tools

There are two ways to buy the material and tools either you can go to the physical store, or you can order all the products online. Thanks to the internet that make the shopping way easy.

But before that, you need to decide what material and tools you want. For this, you can take the help of a website EasyHalfpipe.com. It is a website that provides you with a detailed plan and steps by step instruction DVD at a reasonable price.

Moreover, when it comes to buying material, do not hesitate to spend more. If you do cost-cutting while purchasing the material, then there are chances that you might face a lot of issues in the future.

Always use the best material, so your skatepark works efficiently for the years. Moreover, when it comes to tools, you do not require very expensive and special tools.

The most expensive tool you need is a jigsaw. Apart from this, all you need is a drill, hammer, and screwdriver. There are chances that you or your neighbours already have these tools. If not, then also it is not a problem because you don’t need to spend much money to buy these tools.

  1. Start Creating the Skatepark

While creating the skatepark, you need to focus and build three main things that we have listed below:

Ramps

Ramps are one of the essential parts of backyard skatepark. The ramps provide speed, air, and grindable ledges. Moreover, ramps also give a cool look to the skate park.

To build a ramp, you need the following components:

  • Curved size pieces that are cut with the help of jigsaw.
  • Horizontal joists that must be screwed into the curved side pieces.
  • A curved ramp surface built with plywood sheets and screwed into the joists.
  • A coping made from metal pipe or PVC

When you have all these things, you can start building ramps according to correct dimensions you decide for your skatepark.

Grindable Components

Grind rails can be made of different size and lengths. So the person can quickly master the basic grind tricks. Usually, anyone can easily find a basic grind rail in below $200.

But if anyone wants to spend less, then they can create the grind rails by themself by using the welding tools. Building the grind rail cost significantly less compared to buying the new one.

You can use the website like DIYSkate to build the grind rails by yourself. The DIYSkate have a lot of free blueprints that can guide you on how to create grind rails.

Concrete Bowls

The last step in creating the skatepark is building concrete bowls. Concrete bowls are perfect for the non-stop wave function of skater.

Most of the professional skaters prefer to have concrete bowls in the backyard skatepark. Concrete is a material that dries very fast, so while dealing with concrete, be careful.

Furthermore, you need a lot of planning to build a concrete bowl. Also, to create a bowl, you need to dig a lot which is quite a time-taking and hard process.

Conclusion

Building a skatepark is not much difficult task; all you need is a good plan. However, you need to keep one thing in mind that a lot of energy is required to build the skatepark.

So instead of doing everything alone, you should take the help of friends or family. This thing will speed up the creation process, and all the work will be divided. So no one will feel exhausted.

Moreover, to build a skate, you need some building skills and a lot of free time. If you don’t have much free time, then it is good to hire a company for creating the skatepark instead of creating by yourself.

I hope you guys enjoyed reading this informative article on how to create a DIY backyard skatepark. If you found this article helpful don’t forget to pass it on to your friends.

What are you waiting for?

Try our revolutionary innovation, the brand new Skidz Grind Plates that we know that you are going to love.
0
Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products
Powered Voltage Emoji by Caddy
You haven't saved any items yet!

You must be logged into an account in order to save items.

Login or Register
Powered Voltage Emoji by Caddy